A name on the cup you use
Teaware is held in the hand, which buys back the room a seal does not have. A cup wall or a tea scoop takes two characters comfortably and three at a pinch.
Which characters work here
Up to 16 strokes work on a hand-thrown cup, because the surface is large enough to give dense characters room. This is the carrier where the library’s more elaborate characters — 澜, 霖, 霜 — stop being a problem.
Why it is laid out this way
The name sits on the vertical face of the cup, not around the rim: a curved inscription loses its first and last character to the curve. On a scoop or a caddy lid it lies flat along the length, which is the easiest surface of any carrier here.
Before you commit
Glaze matters more than size. An unglazed clay body takes a carved or pressed name that survives firing; a glazed cup needs the name added as a decal or a brush-written mark under the glaze, which changes what the finished piece can look like.
Ask about this piece
Tell us which carrier, which name, and what you have in mind. The button opens a pre-filled email in your own mail app — nothing is submitted from this page.
Cut it yourself
Not every order starts from a name we generated. Type your own characters, leave the face bare, or send a picture to be pressed in as a seal mark. The preview is drawn at the carrier’s real engraving position, at the size it will be cut.
Up to 1–2 characters here, set horizontal the way the sample on the drawing is. Long names are set smaller rather than run off the object.
The object ships with nothing cut into it. Some buyers want the bare stone, the blank scroll or the plain cup and have it cut at home; that is a real order and it costs the same.
A picture is not printed onto the surface. It is reduced to one colour and cut in that shape, the way a seal prints. Line drawings, monograms and hard silhouettes survive; photographs lose their detail, and the preview shows exactly what survives.
A drawing, not a photograph of the finished piece. Colour and grain vary with the material.